Ghaziabad Uttar Pradesh Quality control Jobs – 116 Open Jobs Today

Incoming Quality Control Engineer
Diksha Elite Academy —Greater Noida, Uttar Pradesh
- ₹30,000 - ₹35,000 a month
- Urgently hiring
- Analysis skills
- Bachelor's degree
- Quality control
Quick apply
14d
Quality Control Engineer (Precast)
Stellar Group —Greater Noida, Uttar Pradesh
- ₹25,000 - ₹50,000 a month
- Full-time
- Bachelor's degree
- Quality control
- Construction experience
- Health insurance
- Cell phone reimbursement
Quick apply
Quality Controller
Gaur Art & handicrafts LLP —Greater Noida, Uttar Pradesh
- ₹30,000 - ₹45,000 a month
- Full-time
- Quality control
- Construction experience
- In-person
Quick apply
Quality Inspector
BINDAL TECHNOPOLYER PVT LTD —Greater Noida, Uttar Pradesh
- ₹20,000 - ₹22,000 a month
- Full-time
- Analysis skills
- Quality control
- In-person
Quick apply
Senior Quality Executive
Indepesca Overseas Pvt. ltd —Okhla, Delhi, Delhi
- ₹30,000 - ₹35,000 a month
- Analysis skills
- Bachelor's degree
- Quality control
Quick apply
Incoming Quality Engineer
SB GROWTH MEDIA —Greater Noida, Uttar Pradesh
- ₹28,000 - ₹35,000 a month
- Urgently hiring
- Bachelor's degree
- Quality control
- In-person
Quick apply
14d
Production Supervisor
Shakti Engineering Works —Mohan Nagar, Ghaziabad, Uttar Pradesh
- ₹20,000 - ₹25,000 a month
- Full-time
- Inventory management
- Supervising experience
- Bachelor's degree
Quick apply
Senior Quality Assurance Executive - Food Industry
Aadishwar Food Prducts —Tughlaqabad, Delhi, Delhi
- ₹15,000 - ₹30,000 a month
- Full-time
- Quality control
- In-person
- Manufacturing
Quick apply
Laboratory Head – Cum – Quality Manager
QA Testing Laboratories Pvt. Ltd. —Noida, Uttar Pradesh
- ₹14,207.26 - ₹63,067.80 a month
- Full-time
- Microsoft Excel
- Laboratory experience
- Microsoft Office
- Health insurance
- Life insurance
Quick apply
7d
Quality Inspector
GKM Energy Pvt Ltd. —Greater Noida, Uttar Pradesh
- ₹8,453.48 - ₹32,036.91 a month
- Full-time
- Electrical experience
- Quality control
- In-person
Quick apply
8d
Quality Control Technician
DACBY Technologies Private Limited —Noida Sector 45, Noida, Uttar Pradesh
- ₹15,000 - ₹25,000 a month
- Full-time
- Analysis skills
- Quality control
- In-person
Quick apply
Quality Inspector
Gurind India Pvt. Ltd. —Noida, Uttar Pradesh
- Full-time
- Analysis skills
- Quality control
- In-person
Quick apply
7d
Assistant Quality Engineer
Vidhyut Control (India) Pvt. Ltd. —Kavi Nagar, Ghaziabad, Uttar Pradesh
- ₹15,000 - ₹22,000 a month
- Email
- Microsoft Word
- Microsoft Excel
- Schematics
Quick apply
Production Supervisor
AARNAV GLOBAL EXPORTS —Sahibabad, Ghaziabad, Uttar Pradesh
- ₹15,000 - ₹25,000 a month
- Full-time
- Microsoft Office
- Analysis skills
- Project management
Quick apply
8d
Quality Engineer ( cutting Tools )
Mg Tools Pvt Ltd —Ghaziabad, Uttar Pradesh
- ₹20,000 - ₹25,000 a month
- Full-time
- Bachelor's degree
- Quality control
- In-person
Quick apply
Production Merchandiser & Quality Controller (QC)
Woven And Knit —Noida, Uttar Pradesh
- ₹40,000 - ₹50,000 a month
- Full-time
- Microsoft Excel
- Merchandising
- Quality control
Quick apply
Quality Control Executive (Textile Export)
Supersonic Marketing Pvt Ltd —Noida, Uttar Pradesh
- Weekend availability
- Quality control
- In-person
Quick apply
Corporate Quality - Hydrogen
JAKSON GROUP —Noida, Uttar Pradesh
- Full-time
- Engineering
- Analysis skills
- Bachelor's degree
Quality Lead - Defence
COMBUSTION RESEARCH ASSOCIATES —Noida, Uttar Pradesh
- Full-time
- ERP systems
- Microsoft Office
- Supervising experience
- Health insurance
Concrete Quality Engineer
NCR CONCRETE PVT LTD —Noida, Uttar Pradesh
- ₹12,000 - ₹25,000 a month
- Full-time
- Microsoft Word
- Civil engineering
- Microsoft Excel
- Cell phone reimbursement
Quick apply
10d

I want to receive the latest job alerts for quality control in ghaziabad uttar pradesh

By signing in to your account, you agree to SimplyHired's Terms of Service and consent to our Cookie and Privacy Policy.

Explore jobs in more locations

quality control jobs near ghaziabad uttar pradesh

Quality Engineer jobs in Kavi Nagar, Ghaziabad, Uttar Pradesh

Quality Engineer jobs in Greater Noida, Uttar Pradesh

Quality Engineer jobs in Noida, Uttar Pradesh

Quality Engineer jobs in Ghaziabad, Uttar Pradesh

Laboratory Manager jobs in Noida, Uttar Pradesh

Quality Assurance Manager jobs in Noida, Uttar Pradesh

Production Supervisor jobs in Sahibabad, Ghaziabad, Uttar Pradesh

Production Supervisor jobs in Mohan Nagar, Ghaziabad, Uttar Pradesh

Quality Manager jobs in Chennai, Tamil Nadu

Senior Quality Specialist jobs in Kowdiar, Thiruvananthapuram, Kerala

Senior Accountant jobs in Secunderabad H.o, Hyderabad, Telangana

Quality Control, Pharmaceutical jobs in Goa

Senior Quality Specialist jobs in Mumbai, Maharashtra

Senior Quality Specialist jobs in Vadodara, Gujarat

Quality Control,garment jobs in Mumbai, Maharashtra

Quality Engineer jobs in Palakkad District, Kerala

Engineer jobs in Vallabh Vidyanagar, Gujarat

Quality Engineer jobs in Uttarakhand

Sales Engineer jobs in Ahmedabad, Gujarat

Quality Engineer jobs in New Colony, Gurugram, Haryana

Incoming Quality Control Engineer

Diksha Elite Academy
Greater Noida, Uttar Pradesh

Quick apply

Job details

Permanent | Full-time
₹30,000 - ₹35,000 a month
14 days ago

Benefits

Provident Fund

Qualifications

Mechanical engineering
Technical drawing
Mechanical Engineering
Quality management
GD&T
Analysis skills
Quality assurance
Bachelor's degree
PPM tools
Quality control
B.E.
Manufacturing
Diploma
CNC

Full job description

Urgent Hiring – Incoming Quality Control Engineer

Department: Quality
Location: Greater Noida / Noida
Employment Type: Full-Time
Reporting To: Quality Head / Quality Manager
Function: Incoming Quality / Supplier Quality
Experience: 4–8 Years Preferred
Qualification: Diploma / B.E. / B.Tech – Mechanical

Role Purpose

We are looking for a hands-on Incoming Quality Control Engineer with strong practical experience in precision manufacturing, dimensional inspection, metrology and supplier quality.

The candidate will be responsible for ensuring that all incoming raw materials, bought-out components, outsourced parts and supplier-processed components meet engineering drawings, specifications, purchase orders and quality requirements before being released to production.

Strong practical knowledge of measuring instruments and shop-floor inspection is mandatory.

Key Responsibilities

Perform incoming inspection of raw materials, components and outsourced parts.
Verify materials/components against drawings, specifications, PO, BOM, control plans and approved samples.
Check part number, revision, quantity, material identification and traceability.
Release conforming material to production.
Identify, segregate and block non-conforming material.
Inspect CNC machined components, aluminium extrusions, steel/stainless steel/brass/aluminium materials, forgings, castings, sheet metal, injection moulded parts, fasteners, plated/anodized/powder-coated components and assemblies.
Prepare incoming inspection and rejection reports.
Coordinate with Purchase, Stores, Production, Engineering and Supplier Quality teams.

Mandatory Metrology & Measuring Instrument Knowledge

Hands-on experience with the following instruments is mandatory:

Vernier Caliper
Outside / Inside Micrometer
Bore Gauge
Height Gauge
Depth Gauge
Dial Indicator / DTI
Thread Plug & Ring Gauges
Snap Gauge
Pin Gauge
Feeler Gauge
Radius Gauge
Surface Roughness Tester
Profile Projector
VMM

Preferred: CMM, Roundness/Cylindricity Tester, Air Gauging, Contour Measuring Equipment and special inspection fixtures.

Candidate should understand least count, resolution, calibration status, gauge setting, measurement repeatability, instrument selection according to tolerance, datum-based inspection and GD&T measurement requirements.

Candidates with only documentation/audit experience and weak practical measurement skills will not be preferred.

Engineering Drawing & GD&T

Read and interpret engineering drawings independently.
Understand limits & fits, datum systems and tolerances.
Knowledge of flatness, parallelism, perpendicularity, position, runout, concentricity, profile, surface finish and threads.
Select the correct inspection method and measuring instrument for drawing requirements.

Raw Material Verification

Material grade and chemical composition
Mechanical properties and hardness
Heat/Batch number
MTC/Mill Test Certificate
Certificate of Conformance
Dimensions and tolerances
Surface condition
Material traceability
Coordinate laboratory testing wherever required

Non-Conforming Material Control

Follow the process:

Identify → Segregate → Label → Block → Disposition

Raise NCR / incoming rejection reports.
Prevent rejected material from entering production.
Coordinate sorting, rework, replacement, RTV or concession/deviation.
Maintain complete traceability of rejected material.

Supplier Quality Coordination

Communicate supplier quality issues with Purchase and Supplier Quality teams.
Share technical rejection details with inspection data, drawing references and photographs.
Follow up with suppliers for RCA, 5 Why, CAPA and 8D.
Track repeat supplier quality issues and support supplier improvement.

Quality Documentation

Maintain:

Incoming Inspection Reports
Material Certificates
Supplier Inspection Reports
NCR / Rejection Reports
Traceability Records
Supplier Corrective Actions
Sampling Records
Inspection Data
Gauge & Calibration Records

Quality Tools

Working knowledge of:

Focus should be on permanent corrective action and prevention of recurrence, not just defect detection.

New Supplier / New Part Development

Initial Sample Inspection
Drawing Verification
Dimensional Inspection
Material Verification
First Article Inspection
PPAP Review
Trial Lot Evaluation
Supplier Sample Approval

Qualification & Experience

Diploma / B.E. / B.Tech in Mechanical Engineering
4–8 years of relevant quality experience preferred
Minimum 3 years of direct Incoming Quality / Supplier Quality experience preferred
Experience in CNC machining, precision manufacturing, automotive, aerospace, industrial engineering or export manufacturing will be an advantage.

Mandatory Competencies

Strong hands-on measuring instrument knowledge
Excellent dimensional inspection skills
Strong engineering drawing & GD&T knowledge
Incoming material inspection experience
Supplier rejection handling
Material traceability knowledge
Data-based quality decision-making
Strong shop-floor orientation
Ownership and follow-up discipline

Key Performance Indicators

Incoming Rejection Control
Supplier Rejection PPM
Repeat Supplier Rejection
Supplier Quality Escapes
Inspection Turnaround Time
Traceability Compliance
Corrective Action Closure
Documentation Accuracy
Reduction in Supplier-Related Production Stoppages
Reduction in Repeat Quality Issues

Selection Process

The selection process may include a practical inspection test, where the candidate will be required to:

Read an engineering drawing
Select appropriate measuring instruments
Inspect a precision-machined component
Record measurement results
Identify non-conformities
Explain the acceptance/rejection decision

Practical measurement and inspection capability will be a key selection criterion.

Ideal Candidate

We are looking for a technically strong, disciplined and hands-on Quality Engineer who is comfortable working in the inspection area, stores and shop floor.

The ideal candidate should ensure that incorrect material, incorrect dimensions, unapproved supplier parts and untraceable material do not enter production.

Pay: ₹30,000.00 - ₹35,000.00 per month

Benefits:

Provident Fund

Ability to commute/relocate:

Greater Noida, Uttar Pradesh: Reliably commute or planning to relocate before starting work (Required)

Education:

Bachelor's (Required)

Experience:

least count, resolution, calibration status, gauge setting: 3 years (Required)
measurement repeatability: 3 years (Preferred)
instrument selection according to tolerance, : 3 years (Required)
datum-based inspection: 3 years (Required)
GD&T measurement requirements: 3 years (Required)
Incoming Quality Control Engineer ( CNC Industry): 3 years (Required)
Raw Material Verification: 3 years (Required)
Supplier Quality Coordination: 3 years (Required)

Work Location: In person

Quick apply

Refine Your Search

quality control jobs in ghaziabad uttar pradesh

Incoming Quality Control Engineer

Quality Control Engineer (Precast)

Quality Controller

Quality Inspector

Senior Quality Executive

Incoming Quality Engineer

Production Supervisor

Senior Quality Assurance Executive - Food Industry

Laboratory Head – Cum – Quality Manager

Quality Inspector

Quality Control Technician

Quality Inspector

Assistant Quality Engineer

Production Supervisor

Quality Engineer ( cutting Tools )

Production Merchandiser & Quality Controller (QC)

Quality Control Executive (Textile Export)

Corporate Quality - Hydrogen

Quality Lead - Defence

Concrete Quality Engineer

I want to receive the latest job alerts for quality control in ghaziabad uttar pradesh

Explore jobs in more locations

Jobseeker tools

Employer Tools

Browse

Stay Connected